ASSEMBLY INSTRUCTIONS
Screw TOP POLE (C) into MIDDLE POLE (B).
The tops of TOP POLES are indicated by
the BLACK END CAP.
Repeat for remaining 4 TOP POLES (C).
© 2018 TRINITY - 800.985.5506
4
C (5)
STEP 5
STEP 6
On POLE (A+B+C), place 1 pair of SLIP SLEEVES (E) at the
desired height between shelves. Please make sure the
arrow faces up and that the word “TOP” is right side up. Do
this for each POLE (A+B+C), and make sure that the heights
are identical for each POLE (A+B+C).
Lower SHELF (D) over TOP POLES (C) so that the corner
cylinders of SHELF (D) are positioned over SLIP SLEEVES (E).
Repeat Step 6 to install other SHELVES (D) as desired.
Note: Use a rubber mallet, if needed, to secure SHELVES (D).
E (20)
D (2)