Trinity ECOSTORAGE TBFZ-0956, Руководство пользователя, Страница: 6 / 12

5
© 2019 TRINITY - 800.985.5506
ASSEMBLY INSTRUCTIONS
Anti-tip Hardware Installation
J (1)
On Wood Stud
Determine wood stud location and mark it on wall, level with topmost shelf. Do this on two different
studs along top shelf.
Place Shelving Rack into position.
Insert Screw through Washer and backside frame of top shelf as shown. Fasten Screw tightly into stud.
Do this for each stud that was marked out.
On Brick/Concrete
Mark out two separate locations on wall, level with topmost shelf.
With a 1/4” drill bit, drill a hole 1 - 1/4” deep at each marked location. Push Anchors flush into each hole.
Place Shelving Rack into position.
Insert Screw through Washer and backside frame of top shelf as shown. Fasten Screw tightly into
Anchor. Do this on both Anchors that were placed in wall.
Washer (2) Anchor (2) Screw (2)
ANTI-TIP HARDWARE PACK (J) is used to protect against accidental
tipping
– especially due to curious children. Note that installing
ANTI-TIP HARDWARE PACK (J) will no longer allow your rack to be
mobile.