Trinity ECOSTORAGE TBFZ-0956, Руководство пользователя, Страница: 3 / 12

© 2019 TRINITY - 800.985.5506
ASSEMBLY INSTRUCTIONS
2
A (4) I (2)
STEP 1
Screw each LOCKING CASTER (H) into each BOTTOM
POLE (A). Turn clockwise to screw in place.
Use provided caster wrench to tighten completely.
Failure to do as instructed could result in caster stem
breaking.
For easiest assembly, do NOT attach TOP POLES (C), MIDDLE
POLES (B) and BOTTOM POLES (A) until instructed. Once
connected, these will be posts for the rack.
Note that POLES (A+B+C) have slight horizontal line indentations
at 1” intervals. Each SLIP SLEEVE (G) has raised horizontal lines
inside designed to lock them in place on POLES (A+B+C).
On BOTTOM POLE (A), place one pair of SLIP SLEEVES (G) at
desired height
no higher than 3rd indentation from bottom.
Please make sure arrow faces up and word “TOP” is right side up.
Slide pair of SLIP SLEEVES (G) until you hear a click to confirm pair
is locked onto BOTTOM POLE (A). Do this for each BOTTOM POLE
(A) and make sure height is identical for each BOTTOM POLE (A).
Do NOT place more than one pair on each pole at a time.
A (4) G (8)
Note: There will be a very small gap in-between two locked SLIP SLEEVES (G) — this is normal.
STEP 2
H (4)
I
G
A
H
A