May 2022
27
©2022-2023 Trinity Trailer Mfg., Inc
.
Figure 25- Do not Operate Conveyor with Doors Closed
Label.
Figure 26- High Voltage Warning Label
Figure 27- Hydraulic Pressure Leak Warning Label.
UNLOAD OPERATING PROCEDURES
!
WARNING
ENGAGE HYDRAULIC SYSTEM
1.
ELECTRIC MOTOR-DRIVEN HYDRAULIC SYSTEM
i.
Make sure the electric motor is in the ‘off’ position.
ii.
Rotate the needle valve
(Figure 9, Page 13) so the lever is toward
the front of the truck bed.
iii.
Plug the electric motor into an approved receptacle which is
appropriately sized and has the necessary safety mechanisms to
properly operate the motor.
iv.
Switch the electric motor on.
Moving conveyor parts can crush and cut and
cause serious bodily injury or death. Keep away
from all moving parts while they are in motion.