Trinity 1004 153 623, Руководство пользователя

Страница: 4 / 12

ASSEMBLY INSTRUCTIONS
Note: There will be a very small gap in-between two locked SLIP SLEEVES (D) — this is normal.
A (4)
For easiest assembly, do not attach TOP POLES (B) and BOTTOM
POLES (A) until instructed. Once connected, these will be posts for the
rack.
Note that POLES (A+B) have slight horizontal line indentations at 1”
intervals. SLIP SLEEVES (D) have raised horizontal lines inside designed
to lock them in place on POLES (A+B).
On BOTTOM POLE (A), place one pair of SLIP SLEEVES (D) at desired
height
no higher than 3 rd indentation from bottom. Please make sure
arrow faces up and word “TOP” is right side up.
Slide pair of SLIP SLEEVES (D) until you hear a click to confirm the pair
is locked onto BOTTOM POLE (A). Do NOT place more than one pair
on each POLE (A) at a time. Do this for each BOTTOM POLE (A) and
make sure height is identical for each BOTTOM POLE (A).
STEP 1
STEP 2
D
A
D (8)
Place SHELF (C) on its side and slide each
BOTTOM POLE (A) through each corner
cylinder on SHELF (C). Make sure SHELF (C)
corner cylinders are positioned over SLIP
SLEEVES (D).
Stand the unit upright.
Note:
•
Level side of SHELF (C) is TOP side (TRINITY
logo on corner cylinders should be right-
side up.)
•
Use a rubber mallet, if needed, to secure
SHELF (C).
C (1)
A
C
© 2019 TRINITY - 800.985.5506
2