Trinity Highway INGAL SS180 M, Инструкция по сборке

Страница: 4 / 65

trinityhighway.com 3 Revision A November 2019
Customer Service Contacts
Trinity Highway is committed to the highest level of customer service. Feedback regarding the
SS180
®
M system, its assembly procedures, supporting documentation, and performance is
always welcome. Additional information can be obtained from the contact information below:
Trinity Highway:
Telephone:
(888) 323-6374 (USA)
+1 (214) 589-8140 (International)
Contact: TrinityHighway.com/Contact
Website trinityhighway.com
Important Introductory Notes
Proper assembly, deployment and future maintenance of the SS180
®
M are critical to achieve
tested performance under accepted MASH criteria. Take the time to review this manual thoroughly
before performing all necessary work. These instructions should be read in their entirety and
understood before assembling the TMA. These instructions are to be used only in conjunction with
the assembly of the SS180 ® M system and are for standard assemblies only as specified by the
applicable highway authority.
In the event your system assembly requires or involves deviation from standard parameters or,
during the assembly process a question arises, please contact Trinity Highway customer service.
These instructions are intended for an individual who is qualified to both read and accurately
interpret them as written. They are intended for the individual who is experienced and skilled in the
assembly of highway products which are specified and selected by the highway authority.
If additional information is required, please contact Trinity Highway Customer Service. If there are
deviations, alterations, or departures from the assembly protocol specified in this manual, the
SS180
®
M many not perform as tested.
Important:
It is the responsibility of the installer to maintain a safe work area
including the use of standard work zone safety equipment & PPE: gloves, safety-
toe shoes, and eye / ear protection.
Important:
DO NOT use any component part that has not been specifically crash
tested and/or approved for this system during assembly or repair.