
documents
"Check Tape Path"
Check Tape Path - see PB user/service
documents
"Command Failed"
Communication Failed - see PB user/service
documents
"Error Code: xxx"
Error Code From PB Meter - see PB user /
service documents
G.1.3 SCALE INITIALIZATION ERRORS
MESSAGE EXPLANATION
"REMOVE WEIGHT"
Scale is switched on with something on the platter
- remove item from platter (NOTE: Only when
scale is in NTEP mode)
"REPLACE PLATTER"
Scale is switched on without platter - re-install
platter (NOTE: Only when scale is in NTEP mode)
"Setting Code Err"
Setting code error - go to Setup mode and enter a
valid setting code to use the PB meter
G.1.4 SETUP MODE ERRORS
MESSAGE EXPLANATION
"Calibration N/A!"
Calibration is not allowed (NOTE: Only when
scale is in NTEP mode)
"ADC Diag N/A"
ADC diagnostics mode is not allowed (NOTE:
Only when scale is in NTEP mode)
Page G-2