
6.5 POSTAGE METER SETUP (TS-70MCI ONLY)
6.5.1 METER
MODE
This function is used to program the meter-operating mode. There are 3 modes to choose from.
•
“0”= Auto Set
: The scale automatically transmits the postage amount to the meter when
the weight stabilizes. This is the recommended setting.
•
“1”= Set Only:
The user is required to press the Set Meter (ENTER) key to transmit the
postage to the meter for each transaction.
•
“2”= Set / Clear:
The user is required to press the Set Meter (ENTER) key to transmit the
postage to the meter for each transaction. The user is also required to press the Set Meter
again to “clear” the last postage amount before the next transaction.
To change the Meter Mode perform the following:
1.
Enter the Meter Mode by pressing and holding the (2) key while turning on the
scale. When the message “Meter Mode” appears on the screen you may
release the (2) key.
2.
Press the “No” key.
3.
The scale will display “Meter Mode (0-2)”
4.
Select the desired Meter Mode.
5.
Press the “Yes” key to confirm your selection.
Page 6-4