TMCM-1076 Hardware Manual • Hardware Version V1.10 | Document Revision V1.00 • 2018-JUN-25
7 / 22
3 Mechanical and Electrical Interfacing
3.1 TMCM-1076 Dimensions and Weight
The dimensions of the TMCM-1076 are approximately 60mm x 60mm x 13mm. There are four mounting
holes for M3 screws for mounting the TMCM-1076. These mounting holes are located in the bottom / base
plate and accessible after removing the top cover (see
5
, right figure, mounting holes marked red). Two of
them at opposite positions can be used for mounting the module to the backside of our NEMA23 stepper
motors (screw/thread length depends on motor size). The other two can be used for mounting the module
to the backside of our NEMA24 stepper motors (screw/thread length depends on motor size).
Figure 5: TMCM-1076 top view mechanical dimensions (left) and position of mounting holes (marked red / right).
All dimensions in mm
Order Code
Dimension in mm
Weight in g
TMCM-1076 60mm x 60mm x 13mm
≈
68
Table 3: TMCM-1076 dimensions and weight
3.2 Mounting Considerations
TMCM-1076 is designed to be mountable on the back of our NEMA23 and NEMA24 motors. Alternatively, it
can be mounted standalone.
©2018 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at
www.trinamic.com
