Trimteck Optimux HPP5500 Series, Руководство по эксплуатации продукта

Страница: 10 / 33

10 HPP5500
series
2.7.2.2 HPP5500R with L/S option
3. Installation
3.1 Safety
When installing a positioner, please ensure to read and follow safety instructions.
 Any input or supply pressures to valve, actuator, and / or to other related devices must
be turned off.
 Use bypass valve or other supportive equipment to avoid entire system “shut down”.

Ensure there is no remaining pressure in the actuator.
3.2 HPP5500L Installation
HPP5500L should be installed on linear motion valves such as globe or gate type which uses
spring return type diaphragm or piston actuators. Before proceeding with the installation,
ensure following components are available.
 Positioner unit

Feedback lever and lever spring
 Flange nut (bottom side of YT-3400L)
 4 pcs x hexagonal headed bolts (M8 x 1.25P)

4 pcs x M8 plate washer