TriMark e-FOB, Руководство по установке

Страница: 15 / 24

2nd Unlock Output
Press and release the Unlock button on the FOB transmitter twice for a
pulse output. Enter secure operation #2 from keypad in standard mode.
In cargo mode, the 2nd unlock output occurs with a cargo unlock
button press.
3rd Unlock Output
The 3rd unlock output is actuated with the unlock command and with
the secure operation #3. If DIP switch #10 is on, the 3rd unlock is
staggered to the lock output. The secure operation #3 continues to
provide a pulse. In cargo mode, staggered lock occurs with a cargo
lock button press.
2nd Auxiliary Output
The 2nd Auxiliary output is actuated by pressing the doorbell button on
the keypad or holding down the unlock button for 2 seconds. The
output is either a pulse output or a 5-minute toggle dependent on DIP
switch #9. This is the doorbell feature on the doorbell keypad.
Panic Mode
Pressing and holding the Horn button (center left) for 2 seconds
activates panic mode. During panic mode, horn/siren is continuously
activated and headlights and parking lights flash for 30 seconds.
Pressing the Lock or Unlock button deactivates panic mode.
Lock/Unlock Confirmation
The horn and siren chirp once when the alarm is armed. If the alarm
has been set off since the last unlock command, the siren and horn
chirp 4 times to indicate the alarm activity when the system is
disarmed. The horn and siren chirp twice on unlock. The headlight and
parking light outputs pulse once on a lock and unlock.
Starter Kill Feature
The starter kill feature is active for 30 minutes after the alarm is
activated. Install a relay controlled by the starter kill feature between
the ignition key switch and starter solenoid.
Vehicle Alarm
The alarm is armed when the doors are locked per DIP switch #6.
When the alarm is armed, the parking lights flash and the horn/siren
chirp. The smart LED flashes continuously.
12