background image

DIP Switch #3: Automatic Lock/Unlock 



DIP switch #3 ON: the auto-locking feature is activated. All 
doors are locked 5-seconds after engine start. Doors unlock 
when the engine is turned off. THIS FEATURE IS CANCELED 
AUTOMATICALLY if the door is open or opened when the    
engine is started. This protects against accidental locking of 
keys in the vehicle.  



DIP switch #3 OFF: Automatic lock/unlock feature is disabled.  

 

DIP Switch #4: Parking Light Supervision 



DIP switch #4 ON: the parking and headlights are actuated with 
the dome lights. Lights flash with a lock command. Lights  

 

remain illuminated for 30 seconds with an unlock command. 
Locking the doors or starting the car deactivates the lights     
immediately.  



DIP switch #4 OFF: the parking and headlights flash once on a 
lock command and twice on an unlock command. 

 

DIP Switch #5: Staggered Lock/Unlock 



DIP switch #5 ON: the staggered locking output occurs with 
lock actuation.  



DIP switch #5 OFF: the staggered lock output is staggered to 
the lock actuation to decrease peak current draw.  

 

Additional System Features  

 

Light Activation 

When the Lock button is pressed, the parking and headlights flash. With 
an unlock instruction; the dome light stays illuminated for 30 seconds. 
The parking and headlight actuation is controlled by DIP switch #4. 
 

2nd Unlock Output (optional: extra installation  
required) 

Press and hold the Unlock button until activation (2 seconds).  
A sustained output is available through the white/brown wire on the  
10-pin harness. See appendix page III for output definition.  
 

Panic Mode 

Pressing and holding the Horn button (lower left) for 2 seconds  
activates panic mode. During panic mode, horn/siren is continuously 
activated and headlights flash for 1 minute. Pressing the Unlock button 
deactivates panic mode.  

Содержание e-Ask e-FOB

















Отзывы: