Trilithic EASyCAP C5020, Руководство по эксплуатации

Страница: 22 / 44

DRAFT
EASyCAP Encoder/Decoder - Manual
20
Network Settings
Network Interfaces
To setup the network interfaces of the Encoder/Decoder, select the plus (+) sign to the left of
Network , and then select the Interfaces link. The Interfaces setup page will be displayed as
shown below.
Network Connection - The EASyCAP Encoder/Decoder must be on a network where CAP
feeds are available and it must also have network connectivity to the EASy Series Encoder/
Decoder. Two different network configurations are possible as follows:
• Single Network Connection - If both the EASyCAP Encoder/Decoder and EASy
Series Encoder/Decoder are on the same network (or subnet) only the Ethernet
connection eth0 should be configured. In this configuration select the Disabled check
box for the second Ethernet port eth1 , otherwise communications will be unreliable.
• Dual Network Connection - If the EASyCAP Encoder/Decoder and EASy Series
Encoder/Decoder are on two different networks (or subnets) both Ethernet connections
eth0 and eth1 must be configured. In this configuration each Ethernet port is assigned
to a different network (or subnet).