General
Warnings:
•
If you do not have the proper tools or find that you are unable to understand the assembly
instructions, have a qualified Trikke dealer assemble the Pon
‐
e for you. If a Trikke dealer assembles
the vehicle for you, be sure to read the Riding and Safety sections of the owner’s manual and watch
the Riding and Safety video manual before riding for the first time
the Riding and Safety video manual before riding for the first time.
•
Immediately stop riding if you suspect that any part of the vehicle is not functioning properly.
Inspect the vehicle closely to confirm what the problem is. Contact your dealer or Trikke Tech, Inc.
directly if you suspect that a malfunctioning or defective part is affecting its safe operation.
•
The front wheel is turned exactly 180 degrees to that of a bicycle. Unlike a bike, a carving
The front wheel is turned exactly 180 degrees to that of a bicycle. Unlike a bike, a carving
vehicle’s front wheel actually trails behind the fork. Altering this wheel position will change the
intended performance of the vehicle. See the photos on page 5 of this manual to see the proper
manufacturer suggested position of the front fork.
•
Riders performing in Trikke Tech, Inc. produced videos and photos are highly skilled and specially
trained professionals. Do not try these tricks yourself or you may lose control and fall causing
serious injury and even death.
•
If you did not receive an instructional video in the box, or if the written or video manual is
damaged, please contact Trikke Tech, Inc. before attempting to assemble or ride the carving vehicle.
•
The Pon
‐
e is an electrified vehicle and as such there is potential for shock and or fire if the
l
i l
i
d i h
d
di i
electrical system is tampered with or exposed to wet conditions.
•
Use of a charger other than the Yiklik charger provided may cause the electrical system to
overheat and/or cause a fire.
Trikke Tribred Pon
‐
e
Owner's
Manual
V1
10/1/08
4
