Step
3:
Attaching
the
Front
Fork
Putting the front fork/motor assembly on in the
proper riding position requires a 5mm Hex
wrench (supplied). First, turn the vehicle upside
down so the fork post (arrow right) is aiming
towards the sky.
Note: place the plastic
packaging support underneath the handlebar to
avoid damaging the throttle. You should do this
procedure on carpet or soft surface to prevent
scratching the handlebars or foot platforms.
Loosen the two Hex bolts on the fork collar using the supplied 5mm wrench. Simply align the
Trikke Tribred Pon
‐
e
Owner's
Manual
V1
10/1/08
9
locking pin with the hole and push the front fork onto the fork post until the top of the fork and the
locking pin meet. Tighten the Hex bolts on the fork collar.
