©1997-2015 TRIKDIS
17
www.trikdis.com
Controller GV15
Configuration and control by SMS messages
Controller operation firmware updating
The controller firmware version can be updated (changed) in the program menu Firmware.
To do so:
1)
Connect the controller to the computer via the USB cable.
2)
Run software "TrikdisConfig
"
.
3)
Select the menu branch Firmware.
4)
Click the button Select and choose the required operation firmware file.
5)
Click the button Update [F12].
6)
Wait for the prompt about the update complete to appear.
7)
Click the button OK in the window opened. After the update all the previous controller operation
parameters will remain the same.
7
Configuration and control by SMS messages
Controller GV15 parameters may be set and changed by sending SMS messages from a phone number, which is on
Administrator list. In case there are not any entered administrator phone numbers in the controller, become an
administrator by sending the following SMS message to the controlled SIM card number: 123456 SETAP
APNR1:+NNNNNNN.
Structure of command SMS message:
PASSWORD
SPACE
COMMAND
SPACE
PARAMETERS
E.g.
123456
SPACE
SETAP
SPACE
APNR1:+NNNNNNNNNNN
Description: 123456
–
password, SETAP
–
command, APNR1:+NNNNNNNNNNN
–
parameters.
Notes
The phone number of the first administrator cannot be deleted but edited only.
The controller will not operate and control by persons specified in User list will be disabled unless every
single administrator name (not exceeding 28 symbols) and phone number (not exceeding 16 digits) is
properly entered.
