www.trikdis.com
19
March, 2019
Ethernet communicator E16T
PING Time
– enable and set time between signals in minutes (required for communication control).
Encryption key
– 6-digit message encryption key. The key written to the communicator must match
the receiver’s key.
„Backup“ settings group
Enable the backup channel mode to send events via backup channel if connection via primary channel is
lost. Backup channel settings are same as described above.
„Settings“ settings group
TCP protocol
– select in which protocol the events should be sent.
„SIA IP parameter“ settings group
Settings can be changed, when the DC-09_2007 or DC-09_2012 encoding for universal receivers is selected
in the TCP protocol field.
Encryption enabled
– if the DC09_2012 TCP protocol is selected, then encryption can be enabled.
DC09-2012 encryption key
– indicates the encryption key.
DC09-2012 receiver No
. – receiver’s number is indicated.
DC-09 line No.
– specify the receiver line number.
Use time stamp –
the time will be included in the message if the field is checked.
„Protegus service“ tab
“Protegus service” settings group
Enable connection
- enable
Protegus
service,
E16T
will be able to exchange data with
Protegus
app
and to be remotely configured via
TrikdisConfig
.
Service code -
6-digit code for connecting to the
Protegus
app (default - 123456). If the Service code
is changed, you will need to enter it, when adding the communicator to
Protegus
.
