Trigon PRINCE, Руководство по эксплуатации

Страница: 12 / 13

Does the PRINCE supply at all a signal? – Attach the PRINCE to another entrance
and examine if it functions. If this is the case, something is wrong with the other entrance
of the amplifier. - Examine the entrance of the preamplifier.
Was a computer data CD inadvertently inserted? – Insert an audio CD.
Did the
PRINCE
read the CD correctly? – If the player cannot read the CD, it tries to
read the data in anyway. If it isn’t successful, the message “NO disc or 0.00 or err”
appears in the display. The CD is either defective or badly scratched and/or dirty. - Use a
new CD.
4.3 ... it hums?
Are the connecting cables tight and firmly put in? – Examine connection leads.
Sometimes multiple groundings can cause so-called humming loops. This problem
requires an experienced technician. We recommend you to contact your specialist dealer.
If your amplifier is equipped with an optical Input, by using of this Input humming loops can
be avoided.
... It hums only, if the tuner, the video recorder, or the television is connected to the
preamplifier. - All these devices are connected with a grounded antenna. Thus it causes a
humming loop again, which can be simply eliminated, in this case simply with a fan-jet
filter, which is switched into the antenna inlet. Such fan-jet filters are available
inexpensively in radio and television speciality shops.
4.4 ... the remote control doesn’t operate?
Does the remote control operate in the preamplifier mode? – Press the key on the
remote control. The LED will shine. The remote control is activated now for the
PRINCE
.
Are the batteries dead? - Insert new batteries.
Is there too much distance? - Reduce the distance. The IR remote control has a limited
range. The IR remote control will operate at a distance of up to eight metes with fully
charged batteries, depending upon exposure to sunlight.
If the receiver probe is exposed to bright sunlight, the range decreases. – Avoid direct
sunlight.