2-20
Using the Setup Program
Deleting or Changing a Password
If you want to delete the current password, display the Supervisor or User
window and then follow these steps:
Select the Supervisor or User icon from the Security menu.
When you see "Enter Current Password", type the current password and press
Enter. If you select the User icon, the message does not appear.
When you see "Enter New Password", just press Enter to delete your current
password.
When you see "Confirm New Password", press Enter again.
When you exit the SETUP program, save your new settings. When you turn
on or reset your computer or run SETUP (depending on the setting in
Password Check of the Advanced Setup menu), you will see the password
prompt.
3
Note
Note
Note
Note
Note
Be sure to remember the password you enter or write it down. If you cannot
remember it, you will not be able to access the computer the next time you turn
it on or run SETUP. However, if you forgot your password, there is a way to
use your system again. See "Accessing Your Current Password" for more
information.
1
2
3
4
When you see "Confirm New Password", type your password again and press
Enter. If the password you type is different from your password, the screen
displays the message "Enter New Password". As you see the following
message, press Enter.
Supervisor Password Installed
or
User Password Installed
2
