TRIGEM 386X, Руководство по эксплуатации

Страница: 39 / 173

difference between the information in CMOS RAM and the
actual configuration, you see a prompt to run the Setup
program.
Whenever a configuration change has been made to the system
and power subsequently applied, the BIOS (Basic Input/Output
System) will generally generate the invalid configuration
message. Pressing Fl after an invalid configuration message is
displayed will cause the system to boot up with a minimum
default system. This will result in the system not being able to
operate with its full potential.
If POST detects an error, you are prompted “Press <Fl> to
RESUME”
The setup program performs the following operations:
Displays date, time, and the screen the list current values
for system options.
Allows you to accept current (default) values or enter
different values for time, date, and system options.
Provides help information about each of the options.
Provides instructions on re-booting the system so that the
new setting can take effect.
Whenever the system is booted, POST always rechecks the
stored setup information against the hardware configuration.
If the data does not agree, the invalid configuration message
will be displayed.
2-2 Running the Setup Program