3
Tape or glue residue can also be easily removed by rubbing a
small amount of liquid dish soap over the adhesive with your
fingers. Wipe with warm water and dry.
·
Do not use sharp instruments, rubbing alcohol, flammable fluids, or
abrasive cleaners to remove tape or glue. These products can
damage the surface of your refrigerator.
·
When moving the refrigerator, do not tilt the refrigerator beyond 45
°
from upright position.
CLEANING BEFORE USE
：
After you remove all of the packaging materials,
（
especially the
foam between outside condenser and cabinet should be removed
）
clean the inside of your fridge before using it.
SPACE REQUIREMENTS
WARNING: Keep flammable materials and vapors, such as
gasoline, away form fridge.
Failure to do so can result in death, explosion, fine or burns.
·
To ensure proper ventilation for your fridge, allow for 200mm space
on each side between walls, 100mm space between back of your
fridge and the wall, and 300mm space between counter top and
the roof or ceiling.
·
If you are installing your fridge next to a fixed wall, leave sufficient
space on the hinge side to allow for the door to swing open.
·
Never install your fridge near heat source and direct sun shins.
ELECTRICAL REQUIREMENT
WARNING:
DO NOT REMOVE GROUND PRONG.
DO NOT USE AN ADAPTOR.
