READ THIS MANUAL CAREFULLY
BEFORE INSTALLING OR OPERATING THE EQUIPMENT
These symbols warn you of any dangers and the measures to be taken to prevent
them.
The most important points for the correct operation of your dryer are printed in bold type.
1. Introduction
Dryspell series is a heatless adsorption air dryer range especially made for small com-
pressed air flow treatment. Compact and easy to maintain, each dryer is equiped with
a pre-filter 0.3micron to protect the dessicant from the variety of air compressed pol-
lutant and with After filters.
1.1 DESIGN
Dryspell heatless regenerating adsorption dryers make it possible to eliminate any water
vapour remaining in the compressed air at the outlet of the comp final condenser
assembly. The dryers have been designed under nominal standard conditions in order to
obtain a dew point of -40
o
C.
1.2 RELEVANT UNITS
This manual describes the following models :
Dryspell
Model
Nominal Flow cfm
5
5
1 0
1 0
1.3 STATEMENT OF CONFORMITY
The units listed above comply with the current legislation and, in particular, with the
following European directives :
l
97/23/CE
: Pressurised Equipments
l
89/392/CEE : Machine Safety
l
89/336/CEE : Electromagnetic Compatibility
l
73/23/CEE
: Low Voltage
!
2
INSTRUCTION MANUAL -
Dryspell
This Document may be modified without notice
reproduction, even partial, forbidden without written Authentication
