5
Model 2400 High-Pressure Filling System User Guide
Preventing Injection Injury
Discharging fluids or compressed air with a dispensing tip against your skin can cause very serious injection
injury. To minimize the risk of injection injury, do not place the dispensing tip in contact with your skin.
Personal Protective Equipment
Operators are recommended
to wear any personal protective equipment specified by their company’s
safety policy for the materials used during filling. Personal protective equipment should be in place and
used at all times before pressurizing the system and when handling any potentially hazardous materials.
Product Overview
Description of the Model 2400
The Model 2400 High-Pressure Filling System accurately fills packages with extremely high-viscosity
materials such as dental composites and restoratives. Due
to their high content of “filler”, these materials
can be hard to dispense and can clog typical filling machines. The high-pressure filler uses a convection
oven to lower the viscosity of the material and then routes materials through the system and into the
containers using high pressure.
Special Features and Benefits of the Model 2400 System
▪
Dispenses extremely high-viscosity, materials
with high “filler” content
▪
Includes a forced convection oven to lower material viscosity
▪
Fills single or multiple syringes and up to 5 compoules simultaneously
▪
Solid-state sensing system controls the amount of fill
▪
Dimensions (W x H x L): 18 in x 11.125 in x 56.75 in [45.72 cm x 28.26 cm x 144.15 cm]
