TriCom TCR-L-50, Руководство оператора

Страница: 5 / 35

1
1.0 INTRODUCTION
1.1 GENERAL INFORMATION
The TCR-U/L-50 Power Amplifier (PA) evolved from the widely fielded TCR-MBA-
50v2 to meet the demands for increased communication range of existing and emerging
handheld and manpack radios utilizing UHF and L-Band waveforms. The PA is
designed for use with UHF narrowband as well as UHF and L-Band wideband
waveforms and shares the same footprint as the TCR-MBA-50v2.
•
Transmit amplification for the 225-450 MHz, 1.25-1.45 GHz (L1), and 1.75-
1.85 GHz (L2) frequency ranges
•
Four co-site filtered receive bands: 225-320 MHz, 225-450 MHz, 1.25-1.45
GHz, and 1.75-1.85 GHz
•
Low Noise High Dynamic Range Receive Pre-Amplifier (LNA) for all bands
•
Two automatic switching antenna ports: UHF and L-Band
•
Active and DC Off/Failsafe L-Band Bypass
•
Carrier Detect Keying and Automatic Frequency Detection
•
UHF SATCOM, DAMA/IW
•
UHF FM, UHF AM, HAVEQUICK II
•
ANW2C and SRW Wideband Networking
•
Tactical Waveforms mode for advanced waveforms
•
Advanced Special Communications Mode (ASCM)
•
RS-485 and USB connectivity for end-user devices and optional Remote
Face Plate and Bias-Tee
•
Simple, three button menu-based user interface with Night Vision Goggle
(NVG) compatible display
•
MIL-STD-810G, MIL-STD-461, MIL-STD-464 (Near Strike Lightning)
•
Excessive temperature, voltage, and current protection
Figure 1-1. TCR-U/L-50 Amplifier