Tricolor LED PAR CAN, Инструкция пользователя

Страница: 7 / 9

7
A B C D
Button Function
<ESC> A Used to access the mode or to return to a previous mode
option
<UP> B Change the value of function you choosing in ascending
order
<DOWN> C Change the value of function you choosing in descending
order
<ENTER> D locate the function of which you want to change the value
Press the MODE button; you can browse all the function, such as AUTO RUN, DMX MODE,
SLAVE MODE, and SOUND
While the function you want, for example, if DMX MODE, the ADDR & MODE can be adjusted.
You can press SETUP button to catch them, if MODE, it has 6 models, press UP & DOWN to
locate it.
Program Mode & Sound Mode:
In Program Mode you can pick your desired factory installed program; static color, color show,
color fade, or color cycle. You can apply a strobe effect to static colors, and control the speed of
the color shows, color fade, and color cycle.
1. Plug the fixture in and press the MODE button till 01 static display, you are now in program
model. Press UP and DOWN to find your desired effect.
2. If you have selected a static color, press SET UP button to enter into the flash rate (F:
000-100), press UP and DOWN to adjust and select your desired flash rate.
3. When you have chosen a color show (02-17), press SET UP button, the display will show
“S000-S100”, Press UP and DOWN button to adjust and set the speed. When the display
shows “F000-F100”, your desired program is running in strobe effect.
4. When the display shows Sound, the unit is working in sound active mode, and the sensitivity
(SENS: 00-99) is adjustable.
Master-Slave Operation:
This function will allows you to link units together to run in a Master-Slave mode. In
Master-Slave operation one unit will act as the controlling unit and the others will react to the
controlling unit’s built-in programs. Any unit can act as a Master or as a Slave however, only one
unit can be programmed to act as the
“
Master.
”
Master-Slave Connections and Settings:
1. Daisy chain your units via the XLR connector on the rear of the unit. Use standard XLR
microphone cables to link your units together. Remember that the Male XLR connector is the
input and the Female XLR connector is the output. The first unit in the chain (master) will use