Tricolor LED PAR CAN, Инструкция пользователя

Страница: 5 / 9

5
Life time: >100 thousand hours
Color: RGB color can be mixed to more than 16.7million kinds of color
Control: DMX512, Master-slave, stand-alone, music Activate
Channel: 6 CH
DMX signal Input/output: 3-pin XLR
Feature: Aluminum case, nice and wide application, less power consumption, high brightness,
stable performance, long life
Function: Color combination changer of the latest hybrid technology and excellent built-in
program, strobe, gradual, pulse, cycle, color selection, music activated, electronic linear Dimmer
Size: 270×270×390mm
N.W: 4KG G.W.: 4.5KG
Packaging: 565*565*420mm (4pcs/CTN)
LED PAR CAN Set Up
Notice:
Be sure to follow figures two and three when making your own cables. Do not use the
ground lug on the XLR connector. Do not connect the cable’s shield conductor to the ground lug
or allow the shield conductor to come in contact with the XLR’s outer casing. Grounding the
shield could cause a short circuit and erratic behavior.
Figure 3
XLR Pin Configuration
Pin 1 = Ground
Pin 2 = Data Compliment(negative)
Pin 3 = Data True(positive)
3-Pin to 5-Pin Conversion Chart:
Note!
If you use a controller with a 5 pin DMX output connector, you will need to use a 5 pin
to 3 pin adapter. The chart below details a proper cable conversion:
3-Pin to 5-Pin Conversion
Conductor 3 Pin Female(Output) 5 Pin Male(Input)
Ground/Shield Pin 1 Pin 1
Data(-) signal Pin 2 Pin 2
Data(+) signal Pin 3 Pin 3
Not Used Do not use
Not Used Do not use