Trico PE-60 Series, Руководство по эксплуатации

Страница: 16 / 25

16 - 25
3-4.2 Lubricant filling
Remove the oil tank cap and fill the tank with
clean lubricant at the level of 80% of the tank
height (Fig. D).
NOTE
Approved lubricant viscosity
MODEL
Viscosity Range
PE-60 series 30~150cSt
PE-70 series
30~250cSt
PE-80 series
30~250cSt
(Fig. D)
Viscosity higher (lower) than recommended viscosity range may result the burn down
(insufficient pressure) of the
lubrication systems.
Use new lubricant only.
3-4.3 Oil pipe connection (including related parts list)
PE-60 series parts list
No. Item Specification Q’ty
Ø4
1
Compression bushing
Ø6
1
Ø4
2
Compression sleeve
Ø6
1
Ø4×1/8
3
Straight adaptor
Ø6×1/8
1
Ø4
4
Aluminum Pipe
(Reference only)
Ø6
1
(Fig. E)
Operation (Fig. E)
a. Check the parts first
b. Remove the compression bushing and compression sleeve out of the outlet
adaptor .
c. Inset the end of the oil pipe into the compression bushing and compression sleeve
and connect with the outlet adaptor
d. The overhead of the pipe after inserting the compression sleeve needs more
than 1mm.
e. Align and tighten the pipe
with the compression bushing to avoid the leaking.
If the pipe is loosen, remove the compression bushing and compression
(PE-60 series)