TrickleStar TS1914 Скачать руководство пользователя страница 8

www.tricklestar.com

TAV Link

TM

 Multi-Sensor

TAV Link

TM

Multi-Sensor

Operation 

Press any button on AV receiver 

or set-up box/DVD/CD player 

remote control to turn on the 

switched outlets.

Press power on all music 

related devices to switch them 

on.

If the TV is not switched on at any time in between, all switched outlets will 

turn off after eight hours.

If the TV is switched on during music mode, the Advanced Pow will 

switch to TV mode.

Countdown Timer Setting

To configure the countdown timer, press and hold the button for 10 seconds 

until the red LED illuminates. Then press:

•   Once for 30 minutes (IR + motion   sensing)

•   Twice for 60 minutes (IR + motion sensing)

•  Three times for 120 minutes (IR + motion sensing) 

•   Four times for 60 minutes (IR sensing only)

•  Five times for 120 minutes (IR sensing only)

After countdown timer is set, the LED will flash the number of times that timer 

has been set to. 

The sensor has a default buzzer notification that will sound at both 10 minutes 

and 3 minutes prior to countdown timer expiration. To disable the audible 

notification, press and hold the button for 10 seconds until the red LED 

illuminates, then press the button six times. The red LED will flash six times to 

confirm that the countdown timer buzzer has been disabled.

Music Mode

Note:

Note:

Energy Saving

IR-only Sensing

Countdown Timer Operation

  For the 60/120 minutes - the multi-sensor senses for IR signal.

  If no IR has been sensed during the 60/120 minute countdown  period,the             

  switched outlets will switch off automatically.

IR 

-   Infrared signal, transmitted by a remote control

IR Signal Sensor   -   Multi-sensor senses for an IR command 

Countdown Timer  -   Time before the switched outlets are automatically switched off

Countdown Period  -   60/120 minutes

LED 

-   Red and Blue dual colour LED located in multi-sensor

 

-   When IR is sensed, the Red LED will flash

Buzzer 

-  Buzzer located in the multi-sensor

Terms

TV & peripherals switch off

TAV-Link sends commands to 

soft-switch off HDMI-connected 

peripherals plugged into the always-on 

and switched outlets

No

Switched outlets

switch on

User switches

TV on

60/120 min countdown timer

starts

IR remote control button

press detected?

Yes

User presses IR

remote control

ALERTS START

Buzzer sounds at 10 min 

and 3 min before 

countdown timer expiration.

Red and blue dual-color 

LED flashes

Содержание TS1914









Отзывы: