www.tricklestar.com
4
1
2
3
TAV Link
TM
Multi-Sensor
The multi-sensor is connected to the powerstrip via the RJ11 port marked
“sensor.” Mount the multi-sensor on the underside of the TV near the IR
receiver on the TV (typically located next to the TV's power on/off button).
The multi-sensor must be located within line of sight of where you
normally use your remote controls.
Sensor/RJ11 Port
Plug the TAV Link
TM
multi-sensor into this port.
There will be a soft audible ‘click’ when the connector is inserted correctly.
Switched Outlets
If there is no IR or motion detected, these outlets will switch off.
TAV-Link Cable (optional, not supplied)
If there is no IR or motion detected, TAV-Link will send high-level CEC
commands to certain HDMI connected devices, allowing them to safely
store their data and settings prior to powering down
1
2
3
4
Product Overview
TAV Link
TM
Multi-Sensor
TAV Link
TM
Multi-Sensor
