INSTALLATION REQUIREMENT
PRODUCT OVERVIEW
LED lights up in Blue
Power button/
LED
The DryerSaver must be plugged into 3 prong or 4 prong grounded wall outlet.
Press to turn the power on and off.
The LED lights up when the power is turned
on.
The DryerSaver is On, but the dryer
is Off.
FOR TECHNICAL SUPPORT
Toll free : 1-888-700-1098
www.tricklestar.com
HOW IT WORKS
The TrickleStar DryerSaver features a sophisticated sensor that measures the humidity and temperature
in the dryer air exhaust stream and switches off power to the electric dryer when the exhaust air reaches
a specified level of dryness.
The TrickleStar DryerSaver consists of:
• DryerSaver Controller with 4-Wire Cord
• Temperature and Humidity Sensor with Cable
• Metal Duct Adaptor
• Sensor Holder
• Hose Clamp
• Mounting Bracket with 4 Self Tapping Screws
• Double Sided Mounting Foam
• Allen Key
• IPA Wipes (1 pc)
• Lugs (4 pcs)
• Strain Relief (1 pc)
• Strain Relief Screws (2 pcs)
• Strain Relief Insulator
Tools needed for installation
• Wrench
• Screwdriver
• Side Cutter
• Crimper
PRECAUTIONARY MEASURE
Before making the installation, turn
off the circuit breaker and leave the
power OFF until you have finished
the installation.
The DryerSaver is monitoring the dryer from
the temperature and humidity sensor.
LED lights up in Red
The temperature and humidity sensor detected
that the clothing load is dry. The DryerSaver
has turned off the dryer.
LED lights up in Magenta
Temperature and Humidity Sensor with Cable
Sensor Ports
DryerSaver Controller
with 4-Wire Cord
Hose Clamp
Sensor Holder
Metal Duct Adaptor
Page 1
