Trickfish Amplification BULLHEAD .5K, Руководство по эксплуатации

Страница: 13 / 16

BH1K Guide 04272105
12
Additional Notes:
•
Please remember that the BH1K will handle a minimum 4 Ohm load and is warrantied as such. Failure to
adhere to this impedance can void the manufacturer’s warranty
•
The BH1K is passively cooled through the use of side panel vents and is constructed from aluminum which
is a metal that provides excellent heat transfer. Our heat tests revealed that the BH1K runs extremely cool
under normal circumstances but, the vents must remain clear for the heat to dissipate. Do not block these
vents as the over-stress of heat buildup will cause the amplifier to shut down until it has cooled to safe
operating temperature. When using the optional rack-ears leave enough room on the sides of the amp for
the heat to dissipate (Don’t pack foam, cables or use the space for storage of personal items.)
•
ALWAYS use quality unshielded speaker cables (16GA pair minimum) and keep the runs as short as
possible
•
Never use an unshielded cable for the instrument input, EFX loops or the DI out.
•
Clip Indicators: The Bargraph on the BH1K is very quick and may pop into the red even though you don
not hear distortion
–
this is an OK situation. However, the last red LED in the input bargraph acts as a clip
indicator for both the pre-amp and power amp and if it glows brighter than the rest, you are clipping and
should back off the gain. If you are running the pre-amp cleanly and the last red LED glows brighter than
the rest you are most likely clipping the power amp and should turn down the master volume until the
condition disappears.
Warranty :
We proudly stand behind our products with a 5 year warranty against manufacturer defects with one exception;
drivers are warrantied against manufacturer defect for 90 days. This warranty extends to the original owner of the
product and the product must have been purchased from an authorized Trickfish Amplification dealer. The owner
must present to us the sales invoice that clearly shows the dealer's name, store location or website, product model
and date of purchase. We do not warranty against abuse, water damage, fire, physical force, modification,
improper installation, power surges or brownouts, or any other damage caused by a third party. Please contact
service@trickfishamps.com or call us at 281-220-7248 to obtain a Return Authorization number for the repair.
Depending on the nature of the repair we may have the unit sent to us or have the owner take it to a local repair
facility. The owner will be responsible for freight charges to the repair facility and if it is deemed, at our discretion,
that the repairs needed fall under the guidelines of the warranty, we will pay the return freight.