Tribest DB-850, Руководство по эксплуатации

Страница: 10 / 32

10
BEFORE FIRST USE
1. Clean all parts thoroughly and dry.
2. Take out the required length of cord from the Electric Cord Tidy at the base of the
Dynablend
®
and plug it into an outlet.
NOTE: The Red Dial Light will flash IF the Dial is at the ‘OFF’ position.
3. Turn on the machine by turning the Dial to the ‘ON’ position. The Red Dial Light
will become solid and the Blue Pre-Programmed Button Lights will be blinking.
Now, your machine is ready to use.
NOTE: 1) For safety reasons, if the electricity goes out while the Dynablend ® is in
operation with the Dial positioned at a variable speed, the Red Dial Light will
flash without resuming operation, this prevents the machine from working
without your awareness when the electricity comes back on. If this happens,
turn the Dial to the ‘ON’ position, make sure the Red Dial Light becomes solid
and the Blue Pre-Programmed Button Lights blink, and then resume operation.
2) If the electricity goes out while the machine was in operation with the
Pre-Programmed Buttons, the Red Dial Light will be solid and the Blue
Pre-Programmed Button Lights will blink when the electricity comes back on.
You may then resume operation.