Tribest DB-850, Руководство по эксплуатации, Страница: 12 / 32

12
CLEANING AND STORAGE
1. After use, fill the Glass Pitcher
1
/
3
full with clean water and run one of the Pre-Programmed
Buttons to remove most of food debris remaining in the Glass Pitcher.
NOTE: If necessary you may add a couple of drops of dish soap.
2. Empty the Glass Pitcher.
3. Repeat Step 1 and Step 2 with the Glass Pitcher
2 /
3
full of clean warm water with NO SOAP
to rinse the pitcher thoroughly.
4. Empty the Glass Pitcher.
5. Dry the Glass Pitcher fully for the next use.
NOTE:
If any food debris remains at the blade assembly area, remove the Blade Assembly
using the Blade Opener provided to clean out the debris. (Please see “How to Remove
Blade Assembly from the Glass Pitcher” page 13.)
Motor Base
1. Unplug the power cord.
2. Wipe the outside surface with a damp cloth or sponge. Do not use abrasive cleaners
on the Motor Base.
3. Dry with a soft cloth or paper towel.
4. The rubber feet on the bottom of the Motor Base will keep the blender from moving
on most work surfaces. Clean the rubber feet regularly. When the rubber feet are dirty,
the machine may move on the counter.
WARNING:
Do not immerse the Motor Base in water.
How to Clean the White Silicone Seal
When you take out the Blade Assembly, you will see a white Silicone Seal placed on the
inside ridge of the Glass Pitcher. Clean it and keep it in a safe place, then replace when
reassembling the Blade Assembly and the Glass Pitcher. (Please see “How to Reassemble
the Blade Assembly” page 13.)