27
This setting is used to select Mute, PCM or
Bitstream. This function is used on your home
theatre system. Refer to installation manual for
correct setting.
Adjust SPDIF delay to overcome any lip sync
issues.
The Aspect Ratio settings are used to select
the video output mode in order to match the
receiving equipment. Note that if the video
resolution is set to HD such as 720p then only
16:9 option is available.
Select the Aspect Ratio option, press ENTER to
select.
Press the UP/DOWN button to toggle between
options;
Aspect Ratio can be set as 16: 9, 4: 3 PanScan,
4: 3 LetterBox.
Press ENTER to save the setting.
To enter this menu, press ‘MAIN MENU > AV’,
then press ‘ENTER’.
You can set the system Contrast by using the
Contrast option.
(1) To select the Contrast option, press the RIGHT
button to adjust the required contrast setting.
(2) Press Recall to go back to the AV settings
menu.
(3) The Contrast can be set from 0 to 24.
(4) The default Contrast setting is 12.
To adjust the Brightness and Saturation settings,
follow the same process as for the Contrast
setting above.
AV Settings
Contrast
Brightness & Saturation
SPDIF and SPDIF Delay
Aspect Ratio
Содержание TSC 114
Страница 52: ...52 Issue 1...