![background image](http://html1.mh-extra.com/html/triax/tnr-4/tnr-4_manual_1160821009.webp)
Using the Start Wizard
By default, the Setup Wizard starts once the NVR has loaded, as shown in Figure below.
Start Wizard Interface
Operating the Setup Wizard:
1.
The Setup Wizard can walk you through some important settings of the NVR. If you don’t want to use the
Setup Wizard at that moment, click the
Cancel
button. You can also choose to use the Setup Wizard next
time by leaving the “Start wizard when NVR starts?” checked.
2.
Click
Next
button on the Wizard window to enter the
Login
window.
Login Window
3.
Enter the admin password. By default, the password is 12345.
4.
To change the admin password, check the
New Admin Password
checkbox. Enter the new password and
confirm the password in the given fields.
5.
Click the
Next
button to enter the date and time settings window.