![background image](http://html1.mh-extra.com/html/triax/tnr-4/tnr-4_manual_1160821021.webp)
Start Live View
Steps:
1. In the live view window, select a playing window by clicking the mouse.
2. Double-click a camera from the device list to start the live view.
3. You can click the
button on the toolbar to start the live view of all cameras on the device list.
Refer to the following table for the description of buttons on the live view window:
Icon
Description
Icon
Description
Select the
window-division
mode
/
Start/Stop all live view
Capture pictures in
the live view mode
/
Start/Stop all
recording
Previous page
Next page
/
Open/Close audio
/
Start/Stop two-way
audio
Adjust volume
/
Enable/Disable digital
zoom
Full-screen
Recording
Before you start
Make sure the device is connected with HDD or network disk, and the HDD or network disk has been initialised
for the first time to use.
Two recording types can be configured: Manual and Scheduled. The following section introduces the
configuration of scheduled recording.
Steps:
1. Click Configuration > Camera Settings > Schedule Settings to enter Record Schedule settings interface.
2. Select the camera to configure the record schedule.
3. Select the checkbox of
Enable Record Schedule
.
4. Click
Edit
to edit record schedule.
5. Choose the day in a week to configure scheduled recording.
1) Configure All Day or Customise record:
l
If you want to configure the all-day recording, please check the
All Day
checkbox.
l
If you want to record in different time sections, check the
Customise
checkbox. Set the
Start Time
and
End Time.
Note:
The time of each segment can’t be overlapped. Up to 8 segments can be configured.
2) Select a
Record Type
. The record type can be Normal, Motion, Alarm, Motion & Alarm, and Motion |
Alarm.
3) Select the checkbox of
Select All
and click
Cop
y to copy settings of this day to the whole week. You
can also check any of the checkboxes before the date and click
Copy
.
4) Click
OK
to save the settings and exit the
Edit Schedule
interface.
6. Click
Advanced
to configure advanced record parameters
.
7. Optionally, select the checkboxes of other cameras to copy the settings to.
8. Click
Save
to validate the above settings.