Triax ST-HD 537, Руководство по эксплуатации

Страница: 10 / 36

Watching TV
Daily operation
Standby mode
Switching On / Off
Adjusting the Volume
Changing Channels
Switching Between Channels
Programme Information
Selecting a Video Output Source
Selecting an Audio Language
• Select Standby mode
If the receiver is switched on, you can
switch it to standby by pressing on the
remote control unit or the front of the receiver
• Switching on from Standby
From standby, press on the remote
control unit or front of the receiver.
Press the VOL+ button to increase the volume
and the VOL- button to decrease the volume.
• We advise setting the volume to full on the receiver
and then use the TV remote for adjusting the
volume as normal
Switch between the current channel and the
previous channel by pressing
LAST. Each press
of the LAST button will toggle between the
current channel and the previous channel
Once the receiver is connected to your TV using
either a HDMI cable or SCART cable, you can
select the appropriate output source by pressing
A/V
on the remote control unit.
Some programmes are broadcast with multiple
audio channels. Press
AUDIO to display the
audio menu.
NOTE
• If you are not going to use this Receiver for long
periods of time, be sure to remove the power
adapter from the supply.
• A small amount of electrical power is still
consumed when the Receiver is in standby mode.
1 Press the INFO button once to display
current time, channel information,
programme name and start/finish times of
selected programmes.
2 Press the INFO button again to display
additional information about the current
programme.
1
Press  /  to select the desired channel.
2
Press
OK
to confirm the audio channel.
10
With number pad With PROG +/-
1
2
3
MUTE
LIBRARY
1
4
7
2
5
8
0
3
6
9
REC LAST
PROG
+
-
Key desired channel number
(refer to channel list)
Settings
AV Settings
Languages
Parental Control
Recording
General
Select
OK
Exit Menu
EXIT
Subtitle Language
Audio Language
Audio Description Language
English