background image

TRIAX DVB 75SI 

12

If you get a clear picture from the satellite receiver, you must then 
set your satellite receiver to use another transmitter channel in the 
range from channel 21 to channel 69 (see below). 

6HWWLQ)RXWSXWFKDQQHO

NOTE: A change of the UHF output channel of the satellite receiver 
requires a change of setting via the main menu of the receiver. The 
UHF output channel can only be seen when the TV is set to channel 
38 as described above. 

If the setting above results in an unsatisfactory picture, you must 
temporarily remove the aerial cable from the antenna/modulator 
input (ANT IN) of the satellite receiver. This is the only way to make 
sure that you can use the UHF channel 38 set to temporarily display 
the main menu of the satellite receiver on the screen to enable you 
to make the necessary changes. 

• 

Activate the main menu of the receiver by 
pressing the 

[menu] 

button on the remote 

control.

The main menu now appears on the screen, and 
the top menu line with the text ‘TV programmes’ 
is clearly marked to appear different from the 
lines below. (See chapter 4.2, page 20) 

• 

In the main menu you must now mark up the 
menu line ’

Settings

’ by moving the marking on 

the screen downwards by means of the 
cursor/arrow buttons 

[arrow down] 

of the 

remote control until the line ‘Settings’ is marked 
and highlighted. 

• 

Confirm the choice by pressing the 

[OK]

 button 

of the remote control. Now the submenu 

Settings

’ will appear on the screen. 

• 

Mark up the menu line 

’Audio/Video Settings’ 

in the same way. 

• 

Confirm the choice by pressing the 

[OK]

 button 

of the remote control. Now the submenu ’

Audio/-

Video Settings’

 will appear on the screen. 

• 

Now select the menu line 

’UHF output channel’

by marking up this line by means of the  

[arrow 

buttons]

of the remote control.  

• 

Now you can enter the new UHF output channel 
that you want to use on your TV by entering the 
number of the channel directly via the numerical 
buttons 

[0-9]

 (channel 21 to channel 69) on the 

remote control.  

Содержание DVB 75SI





























Отзывы: