- 15 -
- 15 -
6 Features of the control unit
All input and output parameters of the individu-
al cassettes can be selected with the buttons on
the control unit.
The user is guided by a two-line display on the
control unit.
When switching on the head-end station, the
software version of the control unit is briefly in-
dicated in the 2-line display.
About 5 minutes after the last button is pressed,
the display is automatically switched off, or the
software version of the control unit is displayed.
Note:
If desired, the software version of the control unit can also manually be dis-
played in the following way:
Press any two buttons on the control unit of the head-end station at the same
time and hold them down until the following occurs:
– The display turns dark,
– after several seconds, the software version, e.g. V.30, is displayed.
The current software version of the head-end station and the cassettes can be
donwnloaded from the Internet address “
http://www.triax.com
”.
BE–Remote
V.30
please wait . . .
Fig. 9
