- 31 -
CGS-2 764 C
• Use the button to set the cursor under "
off
" and delete the PID using the
buttons ("
on
").
• Press the button.
—> The "Renaming a PID" – "
REMAP
" submenu is activated (page 31).
r
ena ming
a
pid
In this menu you can allocate a new address to a PID retaining the complete
data content.
REMAP
off
Bx 4A
0x0000–>0000
• Use the
buttons to place the cursor under the respective digit of the
hexadecimal number of the PID to be changed ("
0x0000
") and set the
hexadecimal number using
.
• Use the
buttons to place the cursor under the respective digit of the
hexadecimal number of the new PID ("
–> 0000
").
• Set the hexadecimal number using
.
• Use the button to set the cursor to "
off
" and rename the PID using the
buttons ("
on
").
• Press the button.
—> Returning to "Option settings" main menu (page 29).
—> If necessary set further channel strips.
• Press the button.
—> The "Output data rate" – "
DATARATE
" main menu is activated.
