Configuring CA modules
8
The
CA Module setup
window is displayed, initially containing default
values.
3. Specify the speed of the CI card in the
Card speed
drop-down list.
4. Specify if a
constant bitrate
is to be used.
5. Select the service(s) that are to be descrambled (indicated by ‘$’) in
the Service list area.
6. Select the
ER
checkbox to enable automatic error recovery for the
service.
Signal transmission status through the CA module is constantly
monitored when the
ER
checkbox is enabled, with the CA module being
automatically reset in the event of data transmission failure. Note that
signal transmission will be interrupted for all the services associated with
the CA module when the error recovery monitoring prompts the resetting
of the CA Module.
The
ER
checkbox should not be enabled for services where signals are
not transmitted on a 24-hour basis.
7. Press the
Setup
button for the selected service.
Tabs
CA module
Common interface
button
Submit button
Reset CAM button
Apply button
Service list
area
Status area
Configuring CA modules
9
The
Filter options
window is set by default to descramble all audio
PIDs associated with the service.
8. Enable the
Descramble non audio/video PIDs
checkbox to
descramble all PIDs associated with the service, that are neither
audio, or video related.
9. Disable the
Descramble all audio PIDs
checkbox to limit the
number of audio PIDs to be descrambled to specific languages.
10. Select an audio PID to be descrambled.
11. Select (if required) additional audio PIDs.
12. Press the
OK
button.
Note that an additional language drop-down list is displayed each time a