Introduction
6
Tabs
Accesses the various tabs used to configure the headend’s input and
output modules.
System
The service tool’s ‘home’ window. Provides system
overview information and configuration
activation/control.
Input
Tab for configuring input modules and services.
Refer to input module manuals for information.
CA Modules
Tab for configuring CI modules and CA cards.
Refer to output module manuals for information.
Output
Tab for configuring output modules and services. Refer
to output module manuals for information.
Network
Tab for defining customer specific settings that are
network related, e.g. Network name, ID, and for defining
HD/SD channel numbering.
Channel
List
Tab for viewing the channels being transmitted from the
headend, as defined in the
Input
,
CA Modules
and
Output
tabs. Refer to input module manuals for
information.
Misc. Buttons
Apply
Stores configuration settings on the SD card located in
the headend.
Button colour
Red
There are changes that have not been stored
on the headend’s SD card.
Grey All changes are stored on the headend’s SD
card.
Log In/Out
Service tool access control.
Admin
.-
Opens the settings for service tool window, where
language, location, time zone, and initial IP addresses
are specified.
Configuring CA modules
7
Configuring CA modules
Pre-requisites
The headend is running, the CA module has been placed in the output
module, the output module is inserted in the headen, and the TDH
Service Tool is connected to the headend.
See the TDH 800 Headend User Guide for information on inserting the
output module into the TDH 800 headend.
Configuration
1. Select the
CA Modules
tab in the TDH Service Tool.
2. Press the
Setup
button for the CA module to be configured.