Triax 305030, Руководство пользователя

Страница: 65 / 72

Seite 65 von 72
Tips and Hints
If the solutions listed here do not eliminate the malfunctions, perform a
factory reset as follows:
Press and hold the standby button on the front of your receiver for
longer than 10 seconds. Now the factory settings will be reloaded.
Caution!!! Thereby you lose your personal settings
Symptom
Possible cause and remedy
Satellite can not
be found, or no
signal
For instance: ASTRA19E
Numeric button 1 (Pre programed on: „Das Erste“)
Button INFO („Das Erste“, FR11837)
Signal and Quality is both 0 %
Align the vertical dish to the south a few millimeters to
the left, wait about 3 seconds and repeat until signal
AND quality are displayed. When a signal of about 60%,
the black background and the TV picture.
For another satellite you select a current program from
the preset channel list and then press the INFO button.
Display on front panel
is black
The power cord is not connected.
Connect the power cable to the mains socket.
Possibility of a short circuit at the antenna feeder: Check
connections
No sound or picture,
but receiver menus
available
The antenna is not directed towards the satellite.
Point the antenna properly.
No signal (with symbol).
Check the cable connection from the LNB to the receiver
and from the receiver to the connected devices.
Adjust the antenna.
On front display
channel number is
visible, TV has no
picture.
The system is not connected properly.
Check the connection of HDMI-/SCART-cables
The TV set is not in HDMI-/AV-Modus.
Turn on the TV set to the respective AV input.