
2
CHAPTER
1
CHAPTER 1 - PRE-INSTALLATION
1.4. Locating Water Heater
• This water heater is not intended for outdoor instal-
lations.
• Keep distance between boiler and water heater to
a minimum to:
– Reduce piping heat loss
– Provide minimal friction loss
• Locate water heater so that any leakage from the
tank or water connections will not cause damage
to the area adjoining the water heater or to lower
floors in the structure.
– When such a location is unavoidable, a suitable
drain pan with adequate drainage, should be
placed under the water heater.
• The SMART Series Water Heaters are designed for
vertical installation only.
BEST PRACTICE
1.5. Recommended Clearances
Water heater should be installed to allow adequate
clearance for servicing.
Zero clearance is permissible to any side of the SMART
Series water heater that has no connection, but infor-
mation labels may be hidden.
Also take into account the clearance required for any
accessory that needs to be installed on the heating
and/or domestic circuits.
• Recommended top or vertical clearance is
12” minimum.
• Refer to boiler manual for boiler clearances.
Fig. 1 - SMART Clearances - View from the Top
Water
Heater
12” Minimum
Wall
Содержание SMART Series
