CHALLENGER
Indirect Circulator
Wiring Harness
Kit
4
Setting the Appliance Parameters
1. Press the
“
”
button at the display panel for
approximately 2 to 3 seconds until the main dis-
play on the left begins to flash.
2. Press the
“
”
button until the operating display
on the right shows parameter number 1.
3. Press the
button to change parameter 1 from
0 to 1 in the main display on the left.
4. After parameter 1 has been changed, press the
reset button to close the setting menu and
store the change. The main display will go
blank and a P will be displayed in the operating
display to let you know the control was pro-
grammed.
If the
reset button is not pressed within 30
seconds, the settings menu is automatically
closed and the changes are stored.
If the
ON/OFF button is pressed prior to
the
reset button, the settings menu is closed
and the changes are NOT stored.
NOTICE
Date: 4/1/13
2013-10 Challenger Indirect Circulator Wiring Harness
