Trianco Aztec Mini, Руководство по установке и эксплуатации

Страница: 7 / 21

7
USER INSTRUCTIONS
The Trianco Aztec Combination boiler has been designed and constructed to give years of trouble-free service
and these instructions are provided to assist you in obtaining the best performance with the least trouble and
cost.
The boiler is fully automatic in operation and requires little attention other than the setting of the thermostat
and any external system controls such as a room thermostat.
IMPORTANT
DO NOT COVER OR BOX IN YOUR BOILER WITHOUT MAKING SUITABLE PROVISION TO ALLOW AIR TO
CIRCULATE FREELY AROUND THE APPLIANCE
WARNING: DO NOT ATTEMPT TO SWITCH ON THE BOILER IF THERE IS ANY POSSIBILITY THAT THE WATER
INSIDE THE HEAT EXCHANGER IS FROZEN
Before turning the boiler on, ensure the system is full of water and all valves fitted to the system are open.
Switch on the power supply, display will illuminate, and one audible tone should be heard. Observe any error
codes – Refer to table on Page 9.
Boiler Multi-Function Display
Press ON/OFF button to turn boiler on – Standby
In Standby Mode
Power and Heating symbol illuminated, no call from WIFI Thermostat.
Setting Boiler Thermostat
Press “UP” Once – Set Temperature Flashes, Use “UP” or “DOWN” to set Temperature between
30°C - 85°C Press “Confirm” to store.
Setting Domestic Hot Water (DHW) Temperature.
Combination Boiler Only
Boiler OFF – Power symbol not illuminated
Press “UP” Once – DHW Temperature Flashes, Use “UP” or “DOWN” to set Temperature between
30°C - 55°C Press “Confirm” to store.