Installation
Specifi
cations
Features
Appendix
Triad InCeiling Rounds Installation Manual - pg. 5
Retro-fi t & Wiring installation:
continued
4. Make sure that the Stereo/Mono switch is set for your intended application.
5. Place the speaker into the hole. Do not lift or carry the speaker using tweeter
arm(s). Rotate the speaker so the tweeter(s) are positioned to be properly aimed.
6. Tighten the three Phillips screws located on the speaker’s front baffl e (see
drawing above) to rotate and tighten the dogs to the sheetrock.
7. Make sure the Tuning Switch on the front baffl e is set for your intended application.
8. Aim the tweeters if desired and install the grill.
Dogs will move
outward and tighten
to secure speaker to
sheetrock
Earthquake Tabs
:
There are three Earthquake tabs
on the back of the SealedRound
back can.
Use cables secured through these
tabs to either attach the speaker to
building structure for earthquakes
or to fl y the speaker from an open
ceiling.
Always check that this work is done
to applicable codes.
