Triad Aer air purifier system, Руководство пользователя

Страница: 3 / 16

3
Specifications/Warnings
Unit
Size: 12” high x 9” wide x 10 3/4” deep
Weight: 8.8 lb.
Coverage: 250ft² to 3000ft² (23m² to 279m²) *
* Depending on variables such as the severity and frequency of pollution, flow of air in the environment, humidity and temperature.
Input: 120V/60Hz .63A
PCO Cell
Normal Mode Output: < 0.02 ppm ozone (ambient room concentration)
Purification Plate
High Mode Output: 25-360mg ozone per hour
Ionization Needle
24 to 30 KV, 20-30 Khz Ion Generation Pulsator
6 KV DC Needle Ion Generator
Review this list before use and performing any maintenance or cleaning of your unit.
Warnings
Specifications
WARNING: Never operate unit near heat source, open flame or flammable/combustible fluids.
WARNING: Do not operate unit unless all parts (including PCO Cell, Purification Plate, Rear Filter Assembly and Rear Cover)
are properly installed.
CAUTION: Directly viewing the lamp inside unit for an extended period (longer than 20 min.) may
result in eye damage.
CAUTION: Never adjust setting to exceed square footage of ventilated space being treated.
CAUTION: Do not use SANI+BOOSTER in occupied spaces. Short term exposure to ozone levels exceeding 0.5 ppm can cause
temporary adverse reactions.
CAUTION:
Unit should be powered OFF and Power Cord should be disconnected when Cleaning/Disassembling/
Reassembling/Servicing.