Triad Aer air purifier system, Руководство пользователя

Страница: 13 / 16

13
The Unit Fails to Turn On
1. Verify that the Power Plug is plugged into an operational wall outlet.
2. Ensure that the Power Adapter Plug is fully seated in the receptacle on the back of the unit.
3. Verify the Power Button has been activated on the Control Panel.
4. If the Power Button on the Control Panel fails, use the Power Button on the Remote Control. If the Control Panel fails, contact
your Triad Aer distributor.
The Unit is Operating in High Mode or Away Mode, but No Noticeable Purification is Being Produced
1. Ensure that the Purification Plate is clean (see “CLEANING: Purification Plate” page 12).
2. The Purification Plate may not be working because it needs to be replaced. Try installing a new Purification Plate.
3. Check the electrical contact arms which touch the plate to ensure that they are making proper contact with the metal weave on
the Purification Plate.
4. Ensure the electrical contact arms which touch the plate are clean. Clean them with a soft cloth and rubbing alcohol.
5. Turn the lights off in the room and look through the Front Grille at the Purification Plate. If it is operating properly, it will
produce a dim purple glow.
The Purification Plate Generates an Electrical Arc, an Arcing Noise or a Burning Odor
1. This means the Purification Plate is damaged and must be replaced. The unit may or may not display the Replace Plate LCD
reminder. To order a replacement, contact your Triad Aer distributor.
The PCO Cell is Not Lighting Up:
1. Ensure the PCO Cell Power Connector is properly seated in the PCO Cell Power Connector Outlet
(see “DISASSEMBLY/ASSEMBLY” pages 10-11).
2. If the PCO still fails to operate, it needs to be replaced. Contact your Triad Aer distributor.
The Ionization Needle Creates an Electrical Arc:
1. The Ionization Needle needs to be cleaned (see “CLEANING: Ionization Needle” page 12). Be sure to complete all of the cleaning
procedures (see “CLEANING” page 12) every 30 days of operation.
The Fan Does Not Operate Properly:
1. Try adjusting the fan speed using the Control Panel or Remote Control.
2. If the Fan continues to operate improperly or not at all, contact your Triad Aer distributor.
The Unit Makes a Rattling Noise When Taken Out of Packaging
1. Remove the back panel of the unit (see “DISASSEMBLY/ASSEMBLY” pages 10-11). Check to ensure the two brass Thumb
Screws holding the Filter Assembly are in their proper place. If they are properly installed, remove the Thumb Screws and
Filter Assembly (see “DISASSEMBLY/ASSEMBLY” pages 10-11) and check the PCO Cell to ensure the two brass Thumb Screws
securing the PCO Cell are installed properly.
Troubleshooting