20
triabeauty.ca
21
3. LIFt tHE LASER AnD PLACE It bACk
On tHE SkIn SO tHAt It OVERLAPS
tHE PREVIOuS SPOt
•
Each time you reposition the treatment
window, move it about half the distance
of the window (about 1/4 inch or 5 mm).
•
This creates an overlapping pattern in
the treatment area, which ensures you
cover all the hair follicles. This works out
to about 25 laser pulses per square inch
or 40 pulses per 10 square cm.
DO nOt
treat repeatedly in the
same spot. Always move the treatment
window to a new area after each laser
pulse. Failure to do so may result in
discomfort or skin heating, which could
cause skin injury.
4. kEEP GOInG untIL yOu HAVE
COMPLEtELy COVERED tHE AREA
yOu WAnt tO tREAt
Always follow the treatment instructions
and warnings provided in this booklet.
nOtE:
You may need to recharge
the Tria Laser Precision when treating
multiple areas.
5. tuRn OFF tHE LASER by HOLDInG
DOWn tHE POWER buttOn
Repeat treatments every 2 weeks for
up to 3 months or until you reach the
desired results.
nOtE:
It is normal for the cooling
fan to turn on and off and emit warm
air through the bottom vent during
treatment.
